Maytag AOCS3040 Manual do Utilizador descarregar pdf (Página 8)

Jenn-Air, Maytag and Magic Chef Fault Codes

WARNING

To avoid risk of electrical shock, personal injury or death; disconnect power and gas supply to oven before

servicing, unless testing requires power and/or gas.

PRODUCT(S): FREESTANDING RANGES, GEMINI AND DOUBLE OVEN

MODELS: MGR6772BD*, MER6549BA*, MER6550AA*, MER6550AC*, MER6550BA*,

MER6550BC*, MER6555AA*, MGR6775AD*, MGR6875AD*, MER6555AA*,

MER6555AC*, MER6751AA*, MER6755AA*, MER6755AC*, MER6775AA*,

MER6775AC*, MER6875AA*, MER6875AC*

Fault

Code

Problem Component(s) to Check

F0-0 No Fault...................................................................... None.

F1-1 Runaway Cook ...........................................................

(Upper Oven)

Check door lock, oven sensor, and harness.

If ok, replace control.

F1-2 Runaway Cook ...........................................................

(Lower Oven)

Check door lock, oven sensor, and harness.

If ok, replace control.

F1-3 Oven temperature above 650˚ F when bake/broiling.

(Upper Oven)

Check door lock, oven sensor, and harness.

If ok, replace control.

F1-4 Oven temperature above 650˚ F when bake/broiling.

(Lower Oven)

Check door lock, oven sensor, and harness.

If ok, replace control.

F1-5 Cancel Key .................................................................

(Upper Oven)

Check that ribbon is making good connection and

inspect ribbon. If ok, replace control.

F1-6 Cancel Key .................................................................

(Lower Oven)

Check that ribbon is making good connection and

inspect ribbon. If ok, replace control.

F1-7 Membrane disconnected............................................ Check that ribbon is making good connection and

inspect ribbon. If ok, replace control.

F1-8 Shorted key in membrane switch ............................... Check that ribbon is making good connection and

inspect ribbon. If ok, replace control.

F1-9 Internal communication error within control ............... Reset power. If error repeats, replace control.

F1-A Control does not see state of lock/unlock switch .......

(Upper Oven)

Check connections on door lock assembly & lock

switch, check wiring from assembly to control.

F1-B Control does not see state of lock/unlock switch .......

(Lower Oven)

Check connections on door lock assembly & lock

switch, check wiring from assembly to control.

F1-C Door switch is not recognized as opened or closed...

(Upper Oven)

Check connections at door switch, check lock

mechanism, check wiring from switch to control.

F1-D Door switch is not recognized as opened or closed...

(Lower Oven)

Check connections at door switch, check lock

mechanism, check wiring from switch to control.

F1-E Control not calibrated ................................................. Replace control.

F1-F Jumper not removed from PCB.................................. Replace control.

F1-H EEPROM read error ................................................... Replace control.

F1-L Sensor Wire................................................................ Ohm wire end to end to ensure a closed path.

F3-1 Sensor open circuit.....................................................

(Upper Oven)

Ohm sensor and harness.

DO NOT REPLACE CONTROL.

F3-2 Sensor circuit open.....................................................

(Lower Oven)

Ohm sensor and harness.

DO NOT REPLACE CONTROL.

F9-1 Latch switch (Upper Oven)......................................... If wire connections ok, replace motorized door lock.

F9-2 Unlock switch (Upper Oven) ...................................... If wire connections ok, replace motorized door lock.

F9-3 Lock and unlock switch (Upper Oven) ....................... If wire connections ok, replace motorized door lock.

F9-4 Lock switch (Lower Oven).......................................... If wire connections ok, replace motorized door lock.

F9-5 Unlock switch (Lower Oven) ...................................... If wire connections ok, replace motorized door lock.

F9-6 Lock and unlock switch (Lower Oven) ....................... If wire connections ok, replace motorized door lock.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 18 19

Comentários a estes Manuais

Sem comentários

Maytag AOCS3040 Manual do Utilizador Página 8

Comentários a estes Manuais

Manuais e produtos relacionados com Fornos Maytag AOCS3040