Maytag MTUC7000AWS Guia de Utilização e Manutenção descarregar pdf (Página 8)

Installation

1. Remove the mounting screws attaching the foot pedal to the

compactor. Remove foot pedal.

2. Remove mounting screws attaching the toe guard to the

compactor. Remove toe guard.

3. Remove the mounting screws attaching the decorative panel

to the compactor. Remove decorative panel and discard

mounting screws.

4. Align the bottom of the custom panel with the bottom of the

drawer front.

5. Secure the panel from the back using four #8 x 1" wood

screws as shown.

6. Reinstall the toe guard using the existing screws and ¹⁄₂"

washer. Then, reinstall the foot pedal.

Custom Panel without Handle

Dimensions

Use these dimension drawings to create a custom panel for use

without a trim kit. The panel should be ¹⁄₂" (1.3 cm) min. thick.

Installation

1. Remove the mounting screws attaching the foot pedal to the

compactor. Remove foot pedal.

2. Remove mounting screws attaching the toe guard to the

compactor. Remove toe guard.

3. Remove the mounting screws attaching the decorative panel

to the compactor. Remove decorative panel and discard

mounting screws.

4. Align the bottom of the custom panel with the bottom of the

drawer front.

5. Secure the panel from the back using 4 – #8 x 1" wood

screws as shown.

A. Mounting screws

B. Foot pedal

A. Handle

B. Custom panel

C. Panel screw locations

D. Toe guard

E. Washer

F. Toe guard screw

A. Mounting screws

B. Foot pedal

15"

(

38.1 cm

)

25"

(63.5 cm)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comentários a estes Manuais

Sem comentários

Maytag MTUC7000AWS Guia de Utilização e Manutenção Página 8

Comentários a estes Manuais

Manuais e produtos relacionados com Compactadores de lixo Maytag MTUC7000AWS